Tag: how to

With the development of electric valves, many well-known valve companies at home and abroad produce electric valves. Electric butterfly valves are important execution units in the field of industrial automation and control. Belonging to a variety of electric valves and electric regulating valves, it is named after the combination of electric actuators and butterfly valves. With the advantages of simple operation and simple structure, the butterfly valve is widely used in textile, power station, petrochemical, heating and refrigeration, pharmaceutical, shipbuilding, metallurgy, light industry, environmental protection and other fields.

An air filter is a device that captures dust from a gas-solid two-phase flow through the action of a porous filter material and purifies the gas. It purifies the air with low dust content and sends it into the room to ensure the process requirements of the clean room and the air cleanliness in the general air-conditioned room.

The handheld metal detector is a high-performance hand-held metal detector specially designed for security. Compared with traditional detectors, the special design of the working surface of the detection area of ​​the metal detector has a large detection area, fast scanning speed and high sensitivity. The shell is made of ABS engineering plastic at one time, which has the characteristics of strong resistance, fine workmanship, lightweight and easy to carry. It can detect all kinds of metal objects hidden in the human body, including jewelry, electrical components, etc.

An air filter is a device composed of fibrous or porous material that removes solid particles such as dust, pollen, mold, and bacteria from the air. Filters containing adsorbents or catalysts also remove odors and gaseous pollutants. Air filters are generally used in clean workshops, laboratories and clean rooms, or for dust prevention of electronic mechanical communication equipment. There are many types of filters. It is mainly divided into primary filter, intermediate filter, high efficiency filter and sub-high efficiency models. Various models have different standards and performance.

There are many types of toxic and harmful gases, each with different properties and concentrations. Therefore, the applicable occasions of toxic and harmful gas detectors are also different. For different production occasions and testing requirements, how to choose a toxic and harmful gas detector? Here, ATO will help you choose a more accurate and suitable toxic gas detector.

The multi gas detector is a portable detector that can detect a variety of toxic, harmful, flammable and explosive gases, and can simultaneously detect toxic gases such as combustible gas, oxygen, carbon monoxide, hydrogen sulfide, VOC, and carbon dioxide. Here, ATO will tell you how to use the portable explosion-proof multi-gas detector correctly.

Nowadays, the real estate development trend is increasingly prosperous, and the building floors are generally on the high side. Many people choose high floors when buying a house, because the view and lighting of high floors are good. But the pressure of tap water on high floors is definitely not as high as that of low-rise residents, so many families will install a booster pump to safeguarding of water supply. So how to install this booster pump? What should be paid attention to when installing a booster water pump? Let’ have a look together.

As automation matures and rises with the extensive use of industrial Ethernet and the establishment of large-scale industrial control networks. Industrial Ethernet switches are also widely used in the field of industrial control. At present, the three-layer industrial Ethernet switch shows a strong growth trend and is replacing routers in the local area network. Its huge market potential is attracting a large number of domestic and foreign manufacturers to join the competition. When choosing a switch ( managed switch or unmanaged switch), faced with such a variety of brands, what aspects should users start with when choosing is a problem that must be solved.

The booster pump, namely a pump used for boosting. According to the substance of action, booster pumps can generally be divided into air pressure pumps and water booster pumps.

The accessories of the magnetic switch applied to the cylinder are also called magnetic cylinder sensors. Today, the combination of magnetic switches and cylinders is widely used in hundreds of fields such as robots, automation equipment, medical equipment, and transportation. So do you know how it works? The following content will provide you with a detailed working principle.

Pressure sensor is a device or device that can feel pressure signal and convert it into usable output electrical signal according to certain rules. Pressure sensor usually consists of pressure sensor and signal processing unit. In addition to understanding the basic information of some pressure sensors, we should also know how to maintain and pay attention to some key points in use. In this article, ATO industrial automation will give you a detailed introduction.

Pure sine wave inverter applies in the long term, it is inevitable due to the combined effect of a number of internal and external factors and the emergence of certain failure, thus affecting the normal use of the device. Then, we need to find specialized service personnel to repair the fault detection. Maintenance is also an important part to ensure normal use. In the following, ATO automation will tell you how to fix it.

Air cooled water chiller is a water cooling equipment that can provide constant temperature, constant flow and constant pressure. Many people in the purchase of the required industrial chiller, often ignore some basic aspects of the refrigeration unit water pipe in the installation and construction process. So, how to pipe the water chiller? laisteel.com will introduce some steps for you.

Explosion proof solenoid valve is made of a full number of turns coil and aluminum alloy material and other common fine process of die casting, it is mainly suitable for full of gas, hydrogen and natural gas and other explosive gas environment. Although explosion proof solenoid valve has many advantages, but also can be improved. In this article, we will give you a detailed introduction to the explosion proof solenoid valve can be improved.

Several factors relate to how to choose the best cable track for your application. The material used for the cable track depends on the type required, how you want it to move and the level of durability required. Selecting the correct drag chain will prevent premature failure of the carrier or internal cable. In order to help you to choose a suitable cable drag chain, ATO industrial automation will introduce some key points when you choosing a cable drag chain.

Solenoid valve is an industrial equipment controlled by electromagnetic, which is used to control the automatic basic components of the fluid and belongs to the actuator. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. Explosion proof solenoid valve is a kind of solenoid valve. Compared with other solenoid valves, it also has a long service life. So how do we choose the right explosion proof solenoid valve? In this article, we will introduce some key points about the selection of explosion proof solenoid valve.

As we all know, the application of accelerometers in the field of automotive electronics becomes increasingly extensive. In these applications, it is usually necessary to measure the acceleration data based on the vehicle coordinate system, which requires the direction of each sensing axis of the acceleration sensor to be consistent with the vehicle coordinate system.

Diaphragm pumps are widely used in some industries and are almost indispensable. The diaphragm pump sucks and discharges gas by means of the reciprocating motion of the diaphragm in the pump body, so the diaphragm is a very important part of the pump body, and its performance has a great influence on the pump. The life of the diaphragm is embodied in several aspects, bending Life, corrosion resistance, high and low temperature performance, so the range of diaphragm materials to meet the above requirements is greatly reduced.

ATO lobe pump is an industrial machine, which mainly relies on the suction generated by the rotor when it rotates, and then transports all the materials that need to be transported to the discharge port according to different mesons. lobe pumps are widely used in petrochemical, fine chemical, daily chemical, pharmaceutical, food, environmental protection, paper, paint, metallurgy and other industries. The following ATO will explain to you how to choose the correct rotary lobe pump.

Diaphragm pump is a new type of mechanical transportation equipment, which can be used for all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. And the diaphragm pump is available in plastics, aluminum alloys, stainless steel, cast iron, etc. for everyone to choose from. So, how to choose a right diaphragm pump?