Cost-effective water leakage detection sensor with controller manufacturer direct sale. With relay NO NC output, RS485 communication method and sound & light alarm, this sensor is suitable for leakage detection of ordinary tap water, air conditioning water, fire water, etc.
Isolated water leakage sensor uses relay (NO/NC) output, and can work under 5V/12V/24V/7-36V voltage, -20℃~60℃ temperature and 0%RH~100%RH humidity. The water leak detection sensor is suitable for communication base stations, hotels, restaurants, precision computer rooms, libraries, warehouses, basement or monitoring computer rooms and other places where there is water accumulation and an alarm is needed.
Low price wind direction anemometer sensor with 0~360° measuring range, RS485 signal output can measure wind direction. Extreme wind speed>70m/S 30min, working at 12~30V DC, aluminum alloy body and vane material, easy to install.
Duct mounted wind speed anemometer sensor is a high precision wind speed measurement device, sensitive response, which can quickly and accurately measure small wind speed, working at 12V DC or 24V DC voltage, selectable 0~15m/s, 0~20m/s, 0~30m/s wind speed. It is easy to install and withstand strong electromagnetic interference such as a field frequency converter.
Cost-effective 2D electronic compass module (single board) has a measurement range of 0° to 360° and high accuracy of ±1°. It supports multiple communication interfaces, including RS232, RS485, TTL, RS422 and Modbus (optional). The module has an operating temperature range of -40°C to +70°C, has good anti-magnetic interference ability, and is widely used in automation control, navigation positioning, robotics and other fields.
Good price 3-phase AC current transducer for sale online, suitable for 0-1A/ 0-5A/0-10A/0-20A AC current input. The accuracy of the three-phase AC current transducer is 0.2/0.5, the response time is less than 400ms, high accuracy and sensitive response. Small size, light weight, easy to install and use.
High-quality 4 electrode electrical conductivity (EC) sensors are suitable for measuring the changes in conductivity values in aqueous solution systems within a wide range. The conductivity measurement range is 0.1~500ms/cm, and the salinity measurement range is 0~500ppt. The digital electrical conductivity (EC) sensor has high accuracy and stable performance. The conductivity measurement accuracy is 1.5%F.S and the temperature measurement accuracy is ±0.5℃.
High frequency 80 GHz radar level sensor is a non-contact radar type level transmitter that can detect solid powder and liquid materials, available with optional 10m to 60m wide range, 24V DC or 220V AC power supply, 4-20mA/RS485/HART output, 3°/8°/20° beam angle and threaded or stainless steel flanged connection. It has an IP67 protection rating and is dust and water resistant.
Magnetostrictive displacement sensor for servo cylinder, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.
Aluminum alloy rail type magnetostrictive sensor for measuring linear displacement, external installation, compact structure, easy to use, good security, suitable for CNC machinery worked in large vibration.
Magnetostrictive level sensor for valve, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.
High resolution rotary encoder with single turn, shaft encoder has RS485/ CAN/ SSI three communication interfaces for selection, with shaft diameter 6mm/ 8mm, blind hole 8mm are optional. The 12 bit absolute encoder offers high quality, high resolution and optional installation advantages.
AC current sensor adopts linear photoelectric isolation or modulation and demodulation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, input current terminal connection, DIN rail installation, widely used for AC current measurement of various occasions.
AC voltage sensors have voltage measuring range from 10V/50V/100V/200V/500V/800V to 1000V, supply voltage DC 9V~36V, work temperature -25~+70℃, frequency range 25Hz ~ 3kHz and good EMC design. Voltage sensors have two installation methods, DIN rail installation and M3 screw fixation.
Reasonable price analog output proximity sensor online for sale, analog inductive sensor has flush/ non-flush two installation types for selection, three output methods can be chosen, M12 connector or 2m PVC cable two connection types. It has an IP67 protection level, and can operate reliably in dust and water vapor environments. M12 proximity sensor is widely used in displacement measurement, thickness measurement, material differentiation and other fields.
Good price proximity sensor for sales, with withstand voltage 1000V/ AC 50/ 60Hz 60s, two installation types (flush and non-flush) for selection, three output methods and two connection types can be chosen. The sensor has a repeatability of ≤±3%, and can maintain a stable output in multiple tests. It has advantages of light weight, small size and long service life.
Economical analog soil moisture sensor for sale, measures 0-100% RH with 0.1% resolution and accuracy of ±2% (0-50% RH) or ±3% (50-100% RH). The soil humidity sensor includes a temperature compensation sensor (0-50°C) and is IP68 rated for waterproofing. Made from anti-corrosion alloy and sealed with black epoxy resin, it can be fully buried or inserted in soil. Suitable for soil probe insertion or immersion in nutrient solutions.
Economical price gyroscope sensor with angular velocity output, measuring range ±50°/ ±150°/ ±300° for selection, measuring axis X/ Y/ Z are optional, input voltage 9-36V, current 6mA. Three axis gyro sensor has advantages of high performance, waterproof, light wight and long service life.
Reasonable price capacitive liquid level sensor for diesel and hydraulic oil, measuring range from 0 to 2000mm. This level transmitter has optional signal output 4-20mA, 0-5VDC, 0-10VDC, power supply 9 ~ 30VDC, 15 ~ 30VDC. The capacitance oil level sensor uses optional direct wire or M12 connector connection methods and has an IP65 protection rating.
Upgrade your automated inspection system with a high-precision diffuse reflective fiber optic sensor! This fiber optic transducer supports a wide range of thread sizes, including M3, M4, and M6, to meet the needs of diverse equipment installations.